Ok now this may be a stupid question, but you know I have to ask anyway.
Have you got slots across the bottom and up both sides.? [ yes I know the answer is yes ]
The slop does sound a little much but to test if there is an issue then
you can Very Very Carefully measure between the plates when its running.
You should see little difference between adjacent plates anywhere in the unit.
It will get lower resistance when it gets hot - so the more current.
But that will be much different when you up the KOH percentage to 25%
and you will probably have to run a fair bit less than 2 v per cell once its Hot.
Glenn.
question on my 80 cell Bob Boyce Design
46 posts
• Page 1 of 4 • 1, 2, 3, 4
question on my 80 cell Bob Boyce Design
by tj4440 » Sat Sep 08, 2007 5:10 pm
- tj4440
- Regular Poster
- Posts: 15
- Joined: Thu Aug 30, 2007 11:20 pm
Re: question on my 80 cell Bob Boyce Design
by ElectroGasMan » Tue Sep 11, 2007 1:11 am
Michael in Kansas
-
ElectroGasMan - Regular Poster
- Posts: 390
- Joined: Fri Sep 29, 2006 3:21 am
- Location: Central Kansas
46 posts
• Page 1 of 4 • 1, 2, 3, 4
Return to Hydrogen Production via Electrolysis
Who is online
Users browsing this forum: Bing [Bot] and 16 guests