Kevinsatterfield's Project Sealed

[glenn_aircooled]

Kevin I see you have posted the pics of your Sealed Series unit.
Very nice.....
Did you get some output results from this.?
Just wondering how it went efficiency wise.
This style has been reported to get the highest efficiency for Low V
electrolysis.

[kevinsatterfield]

Hey Glen...thats as far as i got with that one....nevr hooked it up...was just try'n to give an idea of it.... I built a sealed serries 7 stack and plumbed it up to work without a chemical pump......and it seemed to do nicely compared to its size and all....Thanks for notice'n.....that pik i posted....those plexiglass strips were sanded down to the plate thickness....16 guage....alltho 11 guage seems to be more the same size as that plexiglass.....I used goop household glue to seal em up....im prety sure that the lue will fail after a peroid of time so i didnt bother to finish it.If there was a sealant that wuldnt fail I wuld put it together and see how good it does.

[kevinsatterfield]

ohh I bet yer talk'n about the other one.....it did do good....I wanted to build another stack but didnt want to drill anymore holes in my plates so i veered off it.I never did do a production test with it but it put out more than a single cell and only pulled 5 amps. oH yeah another thing veered me away was i let it run dry one day and it almost ate a hole in one plate.The KOH etched a corner out almost all the way thru.

[glenn_aircooled]

[kevinsatterfield]

Yes Sir ..ill be on it again sometime too.....once some of you guys geter done and post some results on diffrent plate space'n ...maybe....if the plate space'n can be wider id be more apt to go for it now...till then im just tinker'n away with flooded cells.Wat i would really like to understand about serries cells are...why is not browns generators or rhodes...or kleins available more easily?Especially Browns gas generators...why cant i go to my local welding shop and just buy one?

Hope yer cells are OK..if yer solution was a week conditionning solution you shuld be ok.

[kevinsatterfield]

[tazsmanmike]

[kevinsatterfield]

[tazsmanmike]

[kevinsatterfield]

[ElectroGasMan]

[kevinsatterfield]

[kevinsatterfield]

[kevinsatterfield]

[glenn_aircooled]