High Temperature Electrolosis

[huck]

and a little mini-KaBOOM?

[Hybrid]

This is in the lines of bringing water to just Under boil & steam will also
come into the cell. A crazy, but maybe a worthwhile thought. 50/50%
water/methanol (pre mixed) circulated through a cell after passing
through a heat exchanger (next to the exh manifold). The electrolysis
will make hho & the steam rising from the hot water/methanol mix will
combine at the top of the cell. WILL the HHO & Water/Methanol steam
become a decent combustable mixture ? Also possably pump atmos air
into the cell to introduce some nitrogen to the blend might help ? Just a
thought that came to my mind. Cheers !

[FlashBang]

A Little Off the Topic - Hight Temperature Electrolysis

Hybrid:

I am planning something similar to what you have suggested. I have mentioned it parts of it in a couple of threads. I am planning a Low Voltage Cell with 20 plates 12"x2.5" (18 Guage 316L ss) spaced 1/16" apart in 4" tube that is 18" long. I will have a bubbler with a mix of Hydrogen Peroxide (50% dilution) and Isopropyl Alcohol with an aqarium style air stone pushing atmospheric air along with the Hydroxy towards the engine. I hope, that what I will get is sufficient volume plus some of the peroxide and alcohol vapor mixed with the Hydroxy and Nitrogen rich air ... Now I know there there are better alcohols to use, but this stuff is CHEAP and FLAMABLE and available at every dollar store in america.

NOW Back to our regularly scheduled program

FlashBang!

[maxc]