Overunity with magnets, look at this idea??

[clone477]

[dkmacmillan]

[dkmacmillan]

[clone477]

Okay guys, the drawing are really shitty but you should be able to get the idea. There are two separate ideas.


The first idea was to redirect the magnet force pushing back on the vehicle opposing the vehicle movement. You basically have two magnets secured to the back of the vehicle. The you have a U-shaped hydraulic circuit with two magnet cylinder at each end. As one side of the u-tube magnet was opposed it would tranfer the pressure to the other piston magnet at the other end of the u-tube, which would further apply more force to push the vehicle forward. I build a prototype but it did not work, anyone car to explain.

The second basically uses gravity and a wieght to push down on the top of another hydraulic circuit. As the weight(gravity) push down on the top piston, it applies pressure to the magnet piston on the other side of the hydraulic circuit. This would then apply force to move the vehicle forward. I was partially through testing this but my hydraulic circuits kept blowing the seals. Would this work?? Thanks for any insite. Fern

[Aspectus]

Web site doesn't load.
Try diferent place to upload.

[dkmacmillan]

You have to configure it to run behind a router.

[dkmacmillan]

should've put this in the last post

http://www.wfshome.com/faqs.htm#q4

[clone477]

Guys I cant seem to get this hosting thing together through my router. Is there anyone that can host some 3 pictures for me?? Otherwise I guess I could email them. I really want to get some feedback on these ideas from people with more experience than me. Thanks Fern

[pertyfly]

Ok.................Why don't you just create your own project page?!?

Go here: http://www.oupower.com/phpBB2/viewtopic.php?t=203

Chris

[Chris]

[dkmacmillan]