AlaskaStar's Automotive X-Prize Design, Open Source Project-

[Jehu]

[AlaskaStar]

[Jehu]

[AlaskaStar]

Look to using an electron gun to set the hydrogen in motion toward the plate where oxidation will occur.

You can find electron guns in old CRT monitors.

This will suffice for a cheap particle accelerator.

Peltier junctions for the system will be custom made, most likely from woven copper screening (like filter screen used in mining) and woven steel screening (same purpose in mining) in the 200 TPI range. This screening will be bonded to the plates. OR...One plate will be backed with steel, and the other backed with aluminum, or sandwich combinations.

Each time you use a different metal, you have a different electron shell, and each metal that has a different temperature will now give a differential potential in that electron shell. So with heat changes, you will garner electricity. If the heat is 600+ degrees on one side and -40 on the other side and you have a total stack distance of 6 inches, you have an EXTREME amount of electrical energy potential to be gathered.

Think............. outside............... the............... box............


AlaskaStar

[AlaskaStar]

UPDATE:

Humans are stupid primates.

After about 400 pages of dialogue and several WEEKS of telephone time....

CAD drawings, PICTURES, Schematics, face-to-face conversations.....

I am thoroughly CONVINCED that Chimps will take over as the dominate species of Earth.

Is there a Machinist anyplace on the surface of the earth that is of HUMAN decent/ family lineage, that can understand the most basic and simple directions and just do it for a reasonable price?

$3,000.00 USD PER CAMSHAFT is $2900.00 USD OVERPRICED, considering I provide the Camshafts, did 100% of the mathematical work, and covered the shipping costs both ways and even provide CASH as payment. I even expect NOTHING is regard to any warranty expressed or implied. If it doesn't work it's MY FAULT.

Well...

Here it is...See for yourself.

http://www.oupower.com/index.php?dir=_O ... al%20Power

AlaskaStar

[Jehu]

Yeah, them pics are pretty eaisy to understand. Cut, rotate, weld and true. Simple. Maybe a little bit of heat treatment to fix the grains.

But I thought you gave up on this design and went with the Mag-valves?

Well, there is one way to stop dumb people taking over the world. Get all the smart people to breed.


I take it that with the EGPA system there will be no combustion of the hydroxy, right? Basically the sheer speed of the H and O atoms hitting the titainium plate will be enough for oxidisation back to water while the titainium plate will also conduct the heat from the reaction to the working medium. Will the Ti plate also be the secondary anode and collector for the EG? And will it have to be in a vacuume like a TV usually is? Evacuating the water from the tube should be easy as you could just suck it out through a vacuume port.

Also the idea of using mesh for the peltiers is an interesting idea. I'm just trying to visualise how you're going to assemble them. Is it just going to be a simple layered design of two plates on the outside and then alternate layers of mesh sandwitched in between? If so, how many layers are you planning to use? And why not just use really thin plates instead? Hell, why not use foil?

Or are you going to construct the pelts in a different way?

[AlaskaStar]

[morehp]

[morehp]

[Jehu]

[AlaskaStar]

[Jehu]

[BillyHydrogen]

[Jehu]

[AlaskaStar]