Welcome to OUPower.com
"Over Unity Power" Research

PWM Project Page 1

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: September 25, 2006 10:04am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click here to continue Drilling into Projects from adam666

Click Here to Re-Display the Main Project Page

CIRCUIT COMPLETED AND TUNED (to centre freq.)

shown here sporting the 'new look' aka 'little fellas' pulse caps

and a old Intel P3 Heatsink and fan will be used to ensure the 75v 210A hexfet stays nice and cool!

Top view showing heatsink+fan mounted, two larger bolts protruding are main terminals.

Inside view, pots are all close to side for adjustment.

On/Off switch showing, and holes for adjusting pots barely visible. Terminal blocks will be mounted on this side also, parallel to adjustment holes.

circuit part way through assembly - dont laugh too hard at my "SUPER-SIZE" pulse caps :o they were alot smaller in the catalog! honest!! made em fit anyhow ;p

Click here to continue Drilling into Projects from adam666

Click Here to Re-Display the Main Project Page

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: September 25, 2006 10:04am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!