Welcome to OUPower.com
"Over Unity Power" Research

Sealed Cell Project Page 1

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: April 17, 2010 10:33am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click here to continue Drilling into Projects from mos68x

Click Here to Re-Display the Main Project Page

Proceed to another page of the Sealed Cell Project: [<<<   <      >   >>>]

Here is an upclose picture before putting in the fittings.

This is the PTFE sealant that I used on the NPT Yor-Lok fittings, should work rather well. If it doesn't I'll probably start battling with the Teflon tape.

This is the ported end plate that will have four total 1/4"NPT Yor-Lok fittings for water delivery and gas release.

Here is both plates together, the one on the left is clearance drilled for 1/2" bolts, while the one on the right with the 1/4"NPT Yor-Lok fittings is threaded for 1/2-13 bolts on the perimeter.

These are the two solders that I'm using. Obviously the one on the left is the generic rosin core kind you get at Radio Shack (60/40) and the right one is the solid silver solder. Right now I don't remember where I got it from but as soon as I do I'll try to remember to update this blurb.

Proceed to another page of the Sealed Cell Project: [<<<   <      >   >>>]

Click here to continue Drilling into Projects from mos68x

Click Here to Re-Display the Main Project Page

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: April 17, 2010 10:33am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!