Sealed Cell Project Page 9

Welcome to OUPower.com
"Over Unity Power" Research

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: April 17, 2010 10:33am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click here to continue Drilling into Projects from mos68x

Click Here to Re-Display the Main Project Page

Here is how the Yor-Lok assembly is supposed to look.

Both are now installed and ready for the next piece of tubing.

Here you can see that I wanted to bring both up to the top, but since they are both spaced away from the steel the same distance I angled the bottom one in to clear the top one.

Here is a picture of the variac that I'll be using. It only provides 1.8A max so I'm hoping that this will be enough for conditioning the plates.