Welcome to OUPower.com
"Over Unity Power" Research

Electrolysis Project Page 22

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: September 25, 2006 10:04am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click here to continue Drilling into Projects from drewsky

Click Here to Re-Display the Main Project Page

Proceed to another page of the Electrolysis Project: [<<<   <      >   >>>]

The camera did a terrible job at capturing the process, mainly because it was so damn BRIGHT! I apologize for the pictures, but they were the best I could get really :(

Here is a top view just as he is starting to melt 2 pieces together. The hot spot is just beginning here so it is not all blurred out.

Another shot from the side. Ray really wanted to weld something together here so he was quite determined! The challenge came into play due to the fact that the flame is so tiny. It can only heat a very small portion of the metal at one time.

Another attempt at welding 2 pieces together here. -Come on Ray you can do it!

Woohoo success!!! -There you have it folks. The first time that metal has been welded in my basement! No not from some expensive welding unit, but rather from water at a mere 250 watts of power.

I can't wait to start working with the various frequencies. If there is a "magic" frequency where I will get 5x or 10x the gas production for the same 250-300 watts of power... I would be producing so much gas that I could do just about anything with it. Stay tuned as I will do my best to get the parts for that testing phase.

Proceed to another page of the Electrolysis Project: [<<<   <      >   >>>]

Click here to continue Drilling into Projects from drewsky

Click Here to Re-Display the Main Project Page

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: September 25, 2006 10:04am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!