Sealed Cell Project Page 12

Welcome to OUPower.com
"Over Unity Power" Research

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: April 17, 2010 10:33am v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click here to continue Drilling into Projects from mos68x

Click Here to Re-Display the Main Project Page

The charger is drawing 40.7 amps here and that is pushing the cell only after I jump started it with another set of jumper cables that I had. The pump barely runs, just enough to move the fluid around and circulate it a little.

I added more distilled water to replenish what was used and to help reduce the amperage draw. The car battery is powering the pump and the battery charger is powering the cell.

Here is the old cell, that is now for sale, in the Camaro in it's mocked up temporary position.

Here you can see the "hydraulics" to the cell