parallel path magnet motors

Pulse Motors are sometimes referred to as "Brushless DC Pulse Motors". They are identified by their electromagnetic components such as coils and reed switches or hall effect switches. Most use permanent magnets and are brushless.

parallel path magnet motors

Postby sciencisto » Wed Sep 08, 2010 1:37 am

I am experimenting with PPMMs, two of them build in the same way, they differ only by different numbers of turns on the windings and diameter of the wires.
Shot presentations of some of the experiments done until today are presented in my channel at
http://www.youtube.com/scienculo
sciencisto
Regular Poster
 
Posts: 11
Joined: Sun Apr 01, 2007 2:32 am

motor and generator

Postby sciencisto » Fri Sep 17, 2010 3:26 am

I've performed a few dozens of tests with this machine where the windings were setup in different way. What was interesting in these tests were the stator coils connections.
First I connected only 3 stator coils to the powering circuit and the other 3 coils I used as an alternator. So in one case I had a motor and an alternator.
On this video you can see another connection, coils 1-4 are the motor and coils 2-3-5-6 are the alternator.
YouTube - scienculo's Channel
sciencisto
Regular Poster
 
Posts: 11
Joined: Sun Apr 01, 2007 2:32 am

another test

Postby sciencisto » Sun Sep 19, 2010 4:43 pm

I just uploaded a short video of another tests, in which the parallel path magnet motor SRSM3 is shaf coupled with 1 kW old military soviet DC generator.
http://www.youtube.com/watch?v=IDyPNVHYaJw .
sciencisto
Regular Poster
 
Posts: 11
Joined: Sun Apr 01, 2007 2:32 am

more with version 6

Postby sciencisto » Thu Nov 04, 2010 5:07 am

To make it clear and avoid confusion (I deleted one file from youtube and editet the others), here again.
Parallel Path Magnet Motor version 6 (in Polish: Silnik Równoległych Ścieżek Magnetycznych SRSM6):
1.
powered by AAA battery 1.5 V drawing ~0.1 A
http://www.youtube.com/watch?v=3sH2-I8jTng
2.
how it works at input voltage from 1 V to 30 V
http://www.youtube.com/watch?v=Png5o_Ft67c
3.
works at input voltage as low as 0.6 V
http://www.youtube.com/watch?v=Qj9EIEOVkNk

Updated schematic I am using from version 6:
http://servilo.website.pl/laboratorio/e ... rys1_2.png
sciencisto
Regular Poster
 
Posts: 11
Joined: Sun Apr 01, 2007 2:32 am

Re: parallel path magnet motors

Postby diazkathrine » Wed Nov 16, 2011 11:05 am

I just uploaded a short video of another tests, in which the parallel path magnet motor SRSM3 is shaf coupled with 1
kW old military soviet DC generator.
diazkathrine
 
Posts: 6
Joined: Wed Nov 16, 2011 9:57 am

Re: parallel path magnet motors

Postby diazkathrine » Sat Nov 19, 2011 5:10 am

diazkathrine wrote:I just uploaded a short video of another tests, in which the parallel path magnet motor SRSM3 is shaf coupled with 1
kW old military soviet DC generator.

precious metal
diazkathrine
 
Posts: 6
Joined: Wed Nov 16, 2011 9:57 am

Re: parallel path magnet motors

Postby tireboy » Thu Apr 19, 2012 12:52 am

nice video but it's a bit complicated and confusing! anyway thanks for sharing the video. it was very informative
Image
Alternator
Time will fly!
tireboy
Regular Poster
 
Posts: 16
Joined: Fri Feb 24, 2012 3:57 am


Return to Pulse Motors

Who is online

Users browsing this forum: No registered users and 3 guests